Email this article 
Performance tuning of BaFeO3-based electrodes through nickel substitution for protonic ceramic cell applications
Abstract
The development of cobalt-free mixed ionic-electronic conductors (MIECs) for protonic ceramic fuel cells and electrolysis cells (PCFCs/PCECs) requires electrode materials that combine high electrochemical activity with chemical compatibility towards barium-based proton-conducting electrolytes. While many studies have focused on avoiding barium-containing electrode systems due to stability concerns, such materials are in fact highly attractive for PCFCs and PCECs because they share the same cation sublattice as BaCeO3- and BaZrO3-based electrolytes that might minimize interfacial reactions and secondary phase formation. In this context, the perovskite ferrite Pr0.6Ba0.4FeO3–δ represents a promising matrix for electrode design. The present work investigates the effect of partial iron substitution by nickel in Pr0.6Ba0.4Fe1–xNixO3–δ (x = 0.1, 0.2, 0.3) on structural properties, electrical transport behavior, and electrochemical performance. The materials were characterized by X-ray diffraction, four-probe DC conductivity measurements, and electrochemical impedance spectroscopy on symmetrical cells with BaCe0.5Zr0.3Y0.1Yb0.1O3–δ electrolyte. The results establish clear composition–structure–property correlations: the nickel content systematically affects the lattice parameters, governs the conductivity behavior in oxidizing and reducing atmospheres, and influences the electrode polarization resistance and depends strongly on the operating conditions. Notably, the optimal nickel concentration differs between oxidizing and reducing environments, which has direct implications for selecting electrode compositions for specific applications. The findings demonstrate that nickel-doped Pr0.6Ba0.4FeO3–δ offers a flexible compositional platform for designing cobalt-free, barium-containing MIEC electrodes with enhanced compatibility and performance in protonic ceramic electrochemical devices.
Keywords
Full Text:
PDFReferences
Zhao J, Pang Y, Su C, Jiang S, et al., Toward high performance mixed ionic and electronic conducting perovskite-based oxygen permeable membranes: An overview of strategies and rationales, Energy & Fuels, 37(10) (2023) 7042–7061. https://doi.org/10.1021/acs.energyfuels.3c00745
Maring R, Kyriakou V, Activation of bifunctional perovskite oxides through exsolution in symmetrical solid oxide cells: Recent advances, challenges, and outlook, Matter, 8(10) (2025) 102388. https://doi.org/10.1016/j.matt.2025.102388
Sharma P, Sarin A, Bhargava G, A comprehensive review on perovskite cathode on recent advances for intermediate-temperature solid oxide fuel cells, Renewable and Sustainable Energy Reviews, 240 (2026) 117219. https://doi.org/10.1016/j.rser.2026.117219
Danilov NA, Lei L, Medvedev DA, Contemporary trends and frontiers in oxygen electrode design for protonic ceramic electrochemical cells: A scientometric perspective, Chemical Engineering Journal, 535 (2026) 175380. https://doi.org/10.1016/j.cej.2026.175380
Sadykov V, Sadovskaya E, Eremeev N, Kolchugin A, et al., Novel materials based on Ruddlesden–Popper phases for solid oxide fuel cells and oxygen separation membranes: Fundamentals of oxygen transport, Chimica Techno Acta, 12(3) (2025) 12304. https://doi.org/10.15826/chimtech.2025.12.3.04
Tang Y, Qian X, Liu P, Point defect engineering in transition metal oxides: Strategies for enhancing cathode performance of low-temperature solid oxide fuel cells, Journal of Electroanalytical Chemistry, 1010 (2026) 120060. https://doi.org/10.1016/j.jelechem.2026.120060
Wang T, Zhu J, Chen B, Younas M, et al., Pore structure engineering in solid oxide cell electrodes: Formation mechanisms, characterization techniques, and performance implications, Small, 22(32) (2026) e73581. https://doi.org/10.1002/smll.73581
Budiman R, Hapsari A, Damisih, Pravitasari R, et al., Electrochemical performance, governing factors, and reaction mechanism of composite electrode for solid oxide cell: A review, Journal of Power Sources, 678 (2026) 240113. https://doi.org/10.1016/j.jpowsour.2026.240113
Ou M, He S, Yi Y, Zhou C, et al., Advanced cobalt-free perovskite oxide‐based air electrodes for protonic ceramic electrolysis cells, Small, 22(41) (2026) e74107. https://doi.org/10.1002/smll.74107
Zhang H, Xin X, Li S, Qin S, et al., Perovskite air electrodes for reversible protonic ceramic electrochemical cells: Architecture design and degradation mitigation, Electrochemistry Communications, 184 (2026) 108123. https://doi.org/10.1016/j.elecom.2026.108123
Ruan X, Ren R, Xie F, Yu X, et al., Air electrodes for reversible protonic ceramic electrochemical cells: fundamental principles, optimization strategies, advanced characterization, and future perspectives, Coordination Chemistry Reviews, 552 (2026) 217550. https://doi.org/10.1016/j.ccr.2025.217550
Yi Y, Liu Y, Ran R, Yang G, et al., Ruddlesden–Popper perovskite oxides as emerging air electrodes for protonic ceramic cells, Journal of Materials Chemistry A, 14(25) (2026) 15582–15601. https://doi.org/10.1039/d6ta00295a
Dang X, Lu Y, Fan Z, Jiang Y, et al., Strategies to mitigate Sr segregation of the LSCF oxygen electrode for solid oxide cells, Journal of Materials Chemistry A, 13(26) (2025) 20268–20288. https://doi.org/10.1039/d5ta01308a
Mohd abd fatah AF, Rosli AZ, Mohamad AA, Muchtar A, et al., Structural characterization and performance optimization of LSCF–based mechanical physical composite cathodes for intermediate–temperature solid oxide fuel cells: A review, Materials Today Communications, 41 (2024) 110597. https://doi.org/10.1016/j.mtcomm.2024.110597
Safian SD, Abd malek NI, Jamil Z, Lee S, et al., Study on the surface segregation of mixed ionic‐electronic conductor lanthanum-based perovskite oxide La1−xSrxCo1−yFeyO3−δ materials, International Journal of Energy Research, 46(6) (2022) 7101–7117. https://doi.org/10.1002/er.7733
Magnone E, A systematic literature review on BSCF-based cathodes for solid oxide fuel cell applications, Journal of Fuel Cell Science and Technology, 7(6) (2010) 064001. https://doi.org/10.1115/1.4001323
Sikder B, Chanda A, Mechanical characterization of BSCF, a prospective perovskite material for oxygen separation membrane: A brief review, Advanced Engineering Materials, 18(9) (2016) 1529–1536. https://doi.org/10.1002/adem.201600199
Sahini MG, Mwankemwa BS, Kanas N, BaxSr1–xCoyFe1–yO3–δ (BSCF) mixed ionic-electronic conducting (MIEC) materials for oxygen separation membrane and SOFC applications: Insights into processing, stability, and functional properties, Ceramics International, 48(3) (2022) 2948–2964. https://doi.org/10.1016/j.ceramint.2021.10.189
Tsvetkov DS, Sereda VV, Malyshkin DA, Ivanov IL, et al., Chemical lattice strain in nonstoichiometric oxides: an overview, Journal of Materials Chemistry A, 10(12) (2022) 6351–6375. https://doi.org/10.1039/d1ta08407k
Bishop S, Marrocchelli D, Chatzichristodoulou C, Perry N, et al., Chemical expansion: Implications for electrochemical energy storage and conversion devices, Annual Review of Materials Research, 44(1) (2014) 205–239. https://doi.org/10.1146/annurev-matsci-070813-113329
Vargas-Mena FA, Shin Y, Ricote S, Sanhueza gómez FA, A review of cobalt-free positrodes for protonic ceramic cells: bridging fundamental insights and technological development, Progress in Energy, 8(3) (2026) 032001. https://doi.org/10.1088/2516-1083/ae7529
Omeiza LA, Kuterbekov KA, Kabyshev A, Bekmyrza K, et al., Limitations and trends on cobalt-free cathode materials development for intermediate-temperature solid oxide fuel cell- an updated technical review, Emergent Materials, 7(6) (2024) 2189–2204. https://doi.org/10.1007/s42247-024-00737-7
Porotnikova N, Khodimchuk A, Osinkin D, Features of exchange kinetics of BaFeO3−δ-based triple-conducting materials: current state of research, Journal of Materials Chemistry A, 13(34) (2025) 27907–27924. https://doi.org/10.1039/d5ta03192c
Ni C, Zhou J, Zhang Z, Li S, et al., Iron-based electrode materials for solid oxide fuel cells and electrolysers, Energy & Environmental Science, 14(12) (2021) 6287–6319. https://doi.org/10.1039/d1ee01420j
Kasyanova AV, Tarutina LR, Rudenko AO, Lyagaeva JG, et al., Ba(Ce,Zr)O3-based electrodes for protonic ceramic electrochemical cells: towards highly compatible functionality and triple-conducting behaviour, Russian Chemical Reviews, 89(6) (2020) 667–692. https://doi.org/10.1070/RCR4928
Skutina LS, Yang G, Medvedev DA, Engineering the one-pot synthesized Ba(Ce,Fe)O3-based composites as triple-conducting electrodes for solid oxide electrochemical cell applications, Chemical Engineering Journal, 512 (2025) 162320. https://doi.org/10.1016/j.cej.2025.162320
Papac M, Stevanović V, Zakutayev A, O’Hayre R, Triple ionic–electronic conducting oxides for next-generation electrochemical devices, Nature Materials, 20(3) (2021) 301–313. https://doi.org/10.1038/s41563-020-00854-8
Gordeeva MA, Tarutin AP, Starostin GN, Vdovin GK, et al., Functional properties of La1–xBaxFeO3–δ as symmetrical electrodes for protonic ceramic electrochemical cells, Journal of the European Ceramic Society, 43(15) (2023) 6946–6955. https://doi.org/10.1016/j.jeurceramsoc.2023.07.018
Gordeeva MA, Tarutin AP, Vdovin GK, Matkin DE, et al., Ba-containing ferrites, Pr1–xBaxFeO3–δ, as symmetrical electrodes and their functional properties in both oxidizing and reducing atmospheres, Ceramics International, 50(20) (2024) 40417–40428. https://doi.org/10.1016/j.ceramint.2024.02.067
Gordeeva MA, Starostina IA, Murashkina AA, Vdovin GK, et al., Transport properties and phase stability of Ni-doped Pr0.6Ba0.4FeO3–δ as potential symmetrical electrodes for proton-conducting electrochemical cells, International Journal of Hydrogen Energy, 91 (2024) 16–28. https://doi.org/10.1016/j.ijhydene.2024.10.115
Gordeeva MA, Vdovin GK, Medvedev DA, Oxygen-ionic transport of (Pr,Ba)FeO3-based perovskite materials: Results from oxygen permeability experiments, Journal of Membrane Science, 733 (2025) 124365. https://doi.org/10.1016/j.memsci.2025.124365
Gordeeva MA, Homutinnikova EN, Vdovin GK, Medvedev DA, Are the ohmic and polarization resistances of solid oxide electrochemical cells independent from each other?, International Journal of Hydrogen Energy, 218 (2026) 154040. https://doi.org/10.1016/j.ijhydene.2026.154040
Loganathan S, Biswas S, Kaur G, Giddey S, Role of sintering aids in electrical and material properties of yttrium- and cerium-doped barium zirconate electrolytes, Processes, 12(10) (2024) 2278. https://doi.org/10.3390/pr12102278
Nikitin S, Dyakina M, Shakhlevich O, Tsipis E et al, Structure, oxygen nonstoichiometry, and defect chemistry of Nd0.5Ba0.5FeO3−δ, Materials Letters, 383 (2025) 138022. https://doi.org/10.1016/j.matlet.2025.138022
Nikitin S, Shakhlevich O, Protasova S, Mozhchil R et al, Cerium reducibility in Ba–Sr–Ce–Fe oxide perovskites (BaFe0.85Ce0.15O3−δ and Sr0.85Ce0.15FeO3−δ), Journal of Alloys and Compounds, 1065 (2026) 188062. https://doi.org/10.1016/j.jallcom.2026.188062
Ruh T, Berkovec D, Schrenk F, Rameshan C, Exsolution on perovskite oxides: morphology and anchorage of nanoparticles, Chemical Communications, 59(27) (2023) 3948–3956. https://doi.org/10.1039/d3cc00456b
Sun Z, Hao C, Toan S, Zhang R et al, Recent advances in exsolved perovskite oxide construction: exsolution theory, modulation, challenges, and prospects, Journal of Materials Chemistry A, 11(34) (2023) 17961–17976. https://doi.org/10.1039/d3ta03292b
He F, Wu T, Peng R, Xia C, Cathode reaction models and performance analysis of Sm0.5Sr0.5CoO3−δ–BaCe0.8Sm0.2O3−δ composite cathode for solid oxide fuel cells with proton conducting electrolyte, Journal of Power Sources, 194(1) (2009) 263–268. https://doi.org/10.1016/j.jpowsour.2009.04.053
Choi SM, An H, Yoon KJ, Kim B, et al., Electrochemical analysis of high-performance protonic ceramic fuel cells based on a columnar-structured thin electrolyte, Applied Energy, 233–234 (2019) 29–36. https://doi.org/10.1016/j.apenergy.2018.10.043
Lazanas AC, Prodromidis MI, Electrochemical Impedance Spectroscopy─A Tutorial, ACS Measurement Science Au, 3(3) (2023) 162–193. https://doi.org/10.1021/acsmeasuresciau.2c00070
DOI: https://doi.org/10.15826/elmattech.2026.5.078
Copyright (c) 2026 Maria A. Gordeeva, Eugenia N. Homutinnikova, Dmitry A. Medvedev
This work is licensed under a Creative Commons Attribution 4.0 International License.
